Mac Aging; Overview; Configuring The W310 For Mac Aging; Mac Aging Cli Commands - Avaya W310 User Manual

Chapter 11 W310 WLAN Gateway Layer 2 Features

MAC Aging

Overview

The MAC Aging feature allows the user to configure a time interval after which unused
entries in the MAC Table will be deleted.

Configuring the W310 for MAC Aging

This section describes the W310 configuration for the MAC Aging functionality.
• MAC Aging is configured at the W310 level.
• MAC Aging can be globally enabled/disabled using the set mac-aging CLI
command.
— MAC Aging default state is disabled.
— After NVRAM INIT, MAC Aging default state is enabled.
• "mac-aging-time" is set in minutes:
— Default = 5 minutes
— Minimum time =1 minute; maximum time = 3600 minutes

MAC Aging CLI Commands

The following table contains a list of the CLI commands for the MAC Aging feature. The
rules of syntax and output examples are all set out in detail in the W310 CLI Reference
Guide.
Table 11.8
In order to...
Enable/Disable MAC Aging
Set the MAC aging time in minutes
(0=don't age).
Display the current status of the MAC
aging function
Display the MAC aging time in
minutes.
86
MAC Aging CLI Commands
Use the following command...
set mac-aging
set mac-aging-time
show mac-aging
show mac-aging-time
Avaya W310 User's Guide