Chapter 15 Configuring Policy; Policy Overview; General Guidelines For W310 Policy - Avaya W310 User Manual

Chapter 15
Configuring Policy
This chapter provides information about configuring Quality of Service (QoS) policy on the
W310 WLAN Gateway and contains the following sections:
•

Policy Overview

• Defining Policy Lists
• Attaching policy lists to an interface
interface
• Device-Wide Policy Lists
• Defining Rules
criteria
• Composite Operations
configuring composite operations
• DSCP Table
• Displaying and Testing Policy Lists
policy lists and testing their effects on simulated IP packets
Policy Overview
This section provides an overview of policy lists on the W310 and includes the following
topics:
•

General Guidelines for W310 Policy

• Access Control Lists (ACL)
packets are authorized to pass through an interface
• Quality of Service (QoS) Lists
of the QoS field in a packet
• Managing Policy Lists
General Guidelines for W310 Policy
There is no ACL or QoS policy for non-mobile traffic. For mobile (wireless) traffic, the ACL
and QoS policies are implemented as:
• An interface per direction using an Access Point (AP) Group where egress is from the
W310 to the W110 (LAP) and ingress is from the W110 to the W310.
• Through a policy user group.
Avaya W310 User's Guide
— an overview of QoS policy configuration
— instructions for configuring policy lists
— instructions for attaching a policy list to an
— instructions for attaching a policy list to all interfaces
— instructions for configuring rules, including an overview of rule
— a description of composite operations and instructions for
— a description of the DSCP table, with examples
— instructions for viewing the configuration of
— a description of access control lists, which control which
— a description of QoS lists, which can change the value
— an overview of how to manage policy lists on the W310
239