Table of Contents
Advertisement
Chapter 10
Basic Switch Configuration
System Parameter Configuration
Identifying the System Using the CLI
In order to make a W310 WLAN Gateway switch easier to identify, you can define a
•
name for the switch,
•
contact information for the switch technician and the
•
location of the switch in the organization.
In order to...
Configure the system name.
Configure the system contact person
Configure the system location
Displaying Operating Parameters Using the CLI
You can use the following commands to
•
configure and display the mode of operation for the switch and
•
display key parameters.
In order to...
Display system parameters
Display information on the switch
Identifying the System and Displaying the Operating Parameters Using the W310 Manager
The W310 Device Manager's Device Information Dialog Box - General Tab provides you
with general system information about the Avaya W310 device.
To view the information about the device:
•
Click the device symbol in the Tree View.
or
•
Click the device's label in the Chassis View. The Device Information dialog box opens.
54
Use the following command...
set system name
set system contact
set system location
Use the following command...
show system
show module
Avaya W310 User's Guide
Advertisement
Table of Contents
Troubleshooting
