Configuring Wireless Domain Parameters - Avaya W310 User Manual

Chapter 12 W310 WLAN Gateway Wireless Features

Configuring Wireless Domain Parameters

To set the wireless domain parameters, use the wireless-domain-servers command.
In the following example, the master server IP address is 192.168.49.75, the backup server
IP address is 192.168.49.68, and the domain name is R&D.
W310-1#wireless-domain-servers 192.168.49.75 192.168.49.68
R&D
Done!
Wireless Domain CLI Commands
master wireless domain server before you configure any other wireless parameters.
In order to...
Set the master and backup servers for
the network and set a domain name
Set the secret for W310 to W310 or
W310 to Access Point
communications.
NOTE: This command is implemented
immediately after you make your
entries and press Enter.
190
CAUTION: You must configure the W310 with a
Configure the wireless
domain with only one
master and one backup
(optional) W310. For
each additional W310
that is a member of the
domain, you must
configure the W310 to
point to the same master
and backup. Also, if
configuring a backup for
the wireless domain, it
must not be the same
W310 as the master.
Use the following command...
wireless-domain-servers
inter-wireless-gateways-secret
Avaya W310 User's Guide
Continued