Avaya W310 User Manual page 103

In order to...
Set the authentication period (an idle
time between re-authentication
attempts)
Set the authenticator-to-supplicant
retransmission timeout period (the time
for the switch to wait for a reply from
the Authenticated Station)
Set the max-req for all ports (the
maximal number of times the port
tries to retransmit requests to the
Authenticated Station before the
session is terminated)
Globally enable/disable 802.1x
Set dot1x control parameter per port
Initialize port dot1x
Set the port to re-authenticate
Set dot1x re-authentication mode per
port
Set the 802.1x quiet period per port
Set the transmit period per port (a time
interval between attempts to access the
Authenticated Station)
Set the supp-timeout per port (a time
for the port to wait for a reply from the
Authenticated Station)
Set the server-timeout per port (a time
to wait for a reply from the
Authentication Server)
Set the re-authentication period per
port (an idle time between re-
authentication attempts)
Avaya W310 User's Guide
Chapter 11 W310 WLAN Gateway Layer 2 Features
Use the following command...
set dot1x re-authperiod
set dot1x supp-timeout
set dot1x max-req
set dot1x system-auth-control enable/
disable
set port dot1x port-control
set port dot1x initialize
set port dot1x re-authenticate
set port dot1x re-authentication
set port dot1x quiet-period
set port dot1x tx-period
set port dot1x supp-timeout
set port dot1x server-timeout
set port dot1x re-authperiod
Continued
77