Avaya W310 User Manual page 108

Chapter 11 W310 WLAN Gateway Layer 2 Features
Table 11.6
In order to...
Set the TX hold count for the STA
Add a port to the spanning tree
application
Remove a port from the spanning tree
application
Set the port spantree priority level
Set the cost of a port
Set to force a port to send RSTP Bridge
Protocol Data Units (BPDUs)
Display a port's edge admin and
operational RSTP state
Set the port as an RSTP edge port or
non-edge port
Set the port point-to-point admin status
Show the port's point-to-point admin
and operational RSTP status
82
Spanning Tree Protocol CLI Commands
Use the following command...
set spantree tx-hold-count
set port spantree enable
set port spantree disable
set port spantree priority
set port spantree cost
set port spantree force-protocol-
migration
show port edge state
set port edge admin state
set port point-to-point admin status
show port point-to-point status
Avaya W310 User's Guide