Avaya W310 User Manual page 91

The following table provides a list of the fields in the Port Configuration dialog box of the
General tab and their descriptions.
Table 11.2
Field
Set the port name
View the port type for a
selected port
View the port functionality
Set the administrative
status of a port
View the Link Aggregation
(LAG) name
Avaya W310 User's Guide
Port Configuration Dialog Box - General Tab Parameters
Description
Use the Port Name field to define a logical name to the
port for ease of use.
Select the port you want to view by clicking on the port
icon in the Tree View or Chassis View. See the Port
Type field to view the port type; optionally includes
reference to the port connector type. For example, a port
connector type may include 10 or 100TPort +In PWR.
Use the Port Functionality field to view the physical
media type of the selected port.
• If the port conforms to a certain standard (Repeater,
Transceiver, 10BaseT, etc.), this standard is
displayed.
• If the port does not conform to any standard, Private
is displayed.
Example: A 100BaseT Ethernet port functionality is
shown as ethBaseTXwinPWR
Use the Administrative Status field to set the
administrative state of the selected port:
• Enable - The port is enabled and can transmit and
receive packets.
• Disable - The port is disabled and cannot transmit or
receive packets.
Use the LAG Name field to view the name of LAG the
port belongs to, if configured. If it does not belong to a
LAG, Not in LAG is displayed.
To set a LAG:
1 Select the LAG icon or go to Configure and select
LAG. The LAG Information page appears.
2 Click Wizard to start the LAG Wizard.
Chapter 11 W310 WLAN Gateway Layer 2 Features
Continued
65