Chapter 10 Basic Switch Configuration; Introduction; Setting Up Your Display Or Terminal For The Cli - Avaya W310 User Manual

Chapter 10
Basic Switch Configuration

Introduction

This section describes the parameters you can define for the chassis, such as its name and
location, time parameters, and so on.

Setting Up Your Display or Terminal For the CLI

Use the CLI commands described below for configuring the display on your terminal or
workstation.
In order to...
Display or set the terminal width (in
characters)
Display or set the terminal length (in
lines)
Display or set the prompt
Return the prompt to its default value
Clear the current terminal display
Set the number of minutes before an
inactive CLI session automatically logs
out
Display the number of minutes before
an inactive CLI session automatically
times out
Avaya W310 User's Guide
Use the following command...
terminal width
terminal length
hostname
no hostname
clear screen
set logout
show logout
53