Configuring Basic Lap Parameters - Avaya W310 User Manual

Chapter 12 W310 WLAN Gateway Wireless Features
Table 12.14 LAP Configuration Dialog Box - General Tab Parameters (Continued)
Field
Set the AP Group
Name for the LAP

Configuring Basic LAP Parameters

To configure the LAP and associate it to a physical W310 port, you must enter and configure
LAP and radio 802.11 context mode modes. The following example shows how to:
• Assign the default template to the LAP
• Assign a template to the radio card.
• Move to LAP context mode
• Bind the SSID to the LAP
• Reboot the LAP once you have completed assigning the templates.
Example Using the CLI
W310-1(super)# lap-template Default
W310-1(super/802.1 default template)# radio-card-template
802.11a
W310-1(super/802.1 default template/802.11a)# exit
W310-1(super/802.1 default template)# exit
W310-1(super)# lap port-01
W310-1(super/lap port-01)# radio-card-802.11 802.11a first-
slot
W310-1(super/lap port-01/802.11a first-slot)# ssid guest
W310-1(super/lap port-01)# exit
W310-1(super)# exit
Note: When assigning a radio card template, the example shows assigning an 802.11a
template. If you are using a different radio, replace the "a" designation in the command
reference with the LAP technology you are using (for example, "g").
Note: For the ssid2lap command, the SSID will be associated with all W110s connected
to the W310. For example, to apply the SSID "guest" to all W110s.:
W310-1(super/SSID lobby)# ssid2lap
224
Description
In the AP Group Name field, select the AP Group to which
the LAP belongs.
Avaya W310 User's Guide