Step 9: Configure Basic W110 (Lap) Parameters - Avaya W310 User Manual

c. Assign the W310 ports for the W110 (LAP) to the AP Interface. These are the LAPs
that will use the policies described in the previous steps.
W310-1 (super/AP-Group name)#add-ports <port_number>
where:
— <port_number> specifies the ports on the W310 which have LAPs attached.
You can also specify a range of ports, for example, 5-8.
Example:
W310-1 (super/AP-Group public-aps)#add-ports 1,3,5-8,12.

Step 9: Configure Basic W110 (LAP) Parameters

To configure the W110 (LAP) and associate it to a physical W310 port, you must enter and
configure W110 (LAP) and radio 802.11 context mode modes. The following example
shows:
• Assign the default template to the W110 (LAP)
• Assign a template to the radio card.
• Move to W110 (LAP) context mode mode
• Bind the SSID named "guest" to the W110 connected to port 1
• Reboot the W110 (LAP) once you have completed assigning the templates.
Example
W310-1(super)# lap-template Default
W310-1(super/802.1 default template)# radio-card-802.11
802.11a
W310-1(super/802.1 default template/802.11a)# exit
W310-1(super/802.1 default template)# exit
W310-1(super)# lap port-01
W310-1(super/lap port-01)# radio-card-802.11 802.11a first-
slot
W310-1(super/lap port-01/802.11a first-slot)# ssid guest
ssid2lap
This command will reboot the LAP(s) - do you want to continue
(Y/N)? y
W310-1(super/lap port-01)# exit
W310-1(super)# exit
Avaya W310 User's Guide
Chapter 12 W310 WLAN Gateway Wireless Features
143