Default Actions
When no rule matches a packet, the W310 applies the default action for the list. The
following table shows the default action for each type of policy list:
List
Access control list
QoS list
Deleting a Policy List
To delete an access control list, type
list you want to delete. To delete a QoS list, type no
list you want to delete.
Attaching policy lists to an interface
The following policy lists are attached to each interface on the Avaya W310 WLAN
Gateway:
•
Ingress Access Control List
•
Ingress QoS List
•
Egress Access Control List
•
Egress QoS List
When a packet enters the W310 through an interface, the W310 applies the policy lists in the
following order:
1
Apply the Ingress Access Control List.
If the Ingress Access Control List does not drop the packet:
2
Apply the Ingress QoS List.
3
The packet enters the W310 through the interface.
Avaya W310 User's Guide
Default action
Drop all packets
No change to the priority or DSCP
no ip access-control-list
ip qos-list
Configuring Policy
, followed by the number of the
, followed by the number of the
245