Chapter 12
W310 WLAN Gateway Wireless Features
Table 12.8
In order to . . .
Enable or disable the use of
the default community
Enter a wireless domain
master gateway
community string
MAC Access Control List
You can restrict access to a network by building a list of stations, identified by their MAC
addresses to do one of the following:
•
Authorize access to a network through an Access Point.
•
Deny access to a network through an Access Point.
This list is stored by the AP.
The topics covered in this section include:
•
MAC Access CLI Commands
•
MAC Access Configuration Using the W310 Manager
194
Wireless Domain Configuration Parameters (Continued)
Do the following . . .
In the Use default community field, check the box so that all
attached LAPs use the configured Wireless Domain Master
Gateway Community string.
•
If you run Avaya W310 Manager from Avaya Network
Management Console, Avaya W310 Manager uses the
community string configured in Network Management
Console.
•
If you run Avaya W310 Manager in standalone mode, the
device's community string is used.
When unchecked, the Community field becomes read-write,
and Avaya W310 Manager uses the value entered in the
Community field.
In the Community field, enter a Wireless Domain Master
Gateway Community string. This field is read-only except
when the Use default community field checkbox is
unchecked.
Avaya W310 User's Guide