Step 4: Define User Groups - Avaya W310 User Manual

Use this field . . .
Rekeying Interval
(seconds)
For WPA or dot1x
security only
LAP #1..16

Step 4: Define User Groups

Note: If you are using a RADIUS server, you must define the User Group in the W310
Device Manager with the same name used for the RADIUS server User Group. The
RADIUS server property for User Group is 841.
a. To view the User Group Table, select Configure > User Group Table in the Wireless
Manager. The User Group Table dialog displays.
Avaya W310 User's Guide
Chapter 12 W310 WLAN Gateway Wireless Features
To do the following . . .
Set the encryption rekeying interval in seconds. This
interval determines how often a client's encryption key is
changed. Setting a fairly frequent value effectively protects
against intrusion without disrupting network activities.
This value is any value from 60 to 65535 seconds.
This field is only applicable if the value of Security Mode
is either dot1x or WPA.
Associate a W110 (LAP(s)) with the SSID. The selections
are tied to the ports on the W310 to which W110s are
connected. Click on a checkbox to enter a check which
indicates that the W110 (LAP) is associated with the SSID.
A checkbox appears for each W110 (LAP) configured in
the wireless domain.
113