LED
PoE
All LEDs are lit during reset.
Right and Left Arrow Buttons
See
Table 6.2
Figure 6.4
Table 6.2
Description
LED Selection
Reset the W310
Reset Stack
Avaya W310 User's Guide
Chapter 6
Description
Power over Ethernet
(PoE)
for a description of the left and right buttons on the W310 front panel.
Left and Right Arrow Buttons
Avaya W310
Select buttons
Function
Select LED function using either the right or left button (see Table 6.1)
Press both right and left buttons together for approximately two
seconds. All LEDs on the switch remain lit until the procedure is
complete.
Not Applicable.
Avaya W310 WLAN Gateway Front and Rear Panels
State
Meaning
OFF
PoE is disabled for this port.
PoE is powered on and power is being
ON
supplied to a W110.
•
PoE enabled, but no powered device
is detected, or
Blinking
•
Power supply error, or
•
Not enough power
31