Port Redundancy Cli Commands; Port Redundancy Using The W310 Manager - Avaya W310 User Manual

Port Redundancy CLI Commands

The following table contains a list of the CLI commands for the Redundancy feature. The
rules of syntax and output examples are all set out in detail in the W310 CLI Reference
Guide.
Table 11.10 Redundancy CLI Commands (check spec)
In order to...
Define or remove port redundancy
schemes
Enable the defined port redundancy
schemes
Disable the defined port redundancy
schemes
Define the timers that control the port
redundancy operation
Display information on port
redundancy schemes.
Define the switch's unique intermodule
redundancy scheme
Clear the intermodule redundancy
display the intermodule redundancy
entry defined for the switch

Port Redundancy Using the W310 Manager

To view the Port Redundancy dialog box:
1 Click
Or
Select Configure > Port Redundancy. The Port Redundancy dialog box opens.
2 Click the Wizard or Insert button to add a new port redundancy.
3 To configure port redundancy, enter an amount in the Switch Over field.
4 Select one of the Switch Back option buttons.
5 If you selected After x sec, enter the number of seconds for the switch back in the After
x sec field.
Avaya W310 User's Guide
.
Chapter 11 W310 WLAN Gateway Layer 2 Features
Use the following command...
set port redundancy
set port redundancy enable
set port redundancy disable
set port redundancy-interval
show port redundancy
set intermodule port redundancy
set intermodule port redundancy off
show intermodule port redundancy
91