Chapter 11 W310 Wlan Gateway Layer 2 Features; Overview - Avaya W310 User Manual

Chapter 11
W310 WLAN Gateway Layer 2 Features
This section describes the W310 Layer 2 features. It provides the basic procedures for
configuring the W310 for Layer 2 operation.

Overview

The W310 family supports a range of Layer 2 features. Each feature has CLI commands
associated with it. These commands are used to configure, operate, or monitor switch
activity for each of the Layer 2 features.
This section of the User's Guide explains each of the features. Specifically, the topics
discussed here include:
• Ethernet
• VLAN Configuration
• IEEE 802.1X PBNAC (Port Based Network Access Control)
• Spanning Tree Protocol
• Rapid Spanning Tree Protocol (RSTP)
• MAC Aging
• Link Aggregation Group (LAG)
• Port Redundancy
• IP Multicast Filtering
• Multilayer Policy
• Weighted Queuing
• Port Classification
When a data port is connected to a W110 (LAP), the behavior of the port is changed.
Please refer to
changes.
Avaya W310 User's Guide
"Ports connected to W110 LAP" for a summary of the
59