Avaya W310 User Manual page 70

Chapter 8 User Authentication
Table 8.1
In order to . . .
Enable or disable a
secondary server
Set the primary server IP
address
Set the secondary server IP
address
Set the RFC 2138
approved UDP port
number.
Configure a character
string to be used as a
"shared secret" between
the switch and the
RADIUS server.
Verify the shared secret
Set the time to wait before
re-sending a RADIUS
server access request.
Set the number of times a
RADIUS server access
request is sent when there
is no response
Remove a primary or
secondary RADIUS
authentication server
48
Device Information Fields - RADIUS Tab (Continued)
Do the following . . .
Use the Set Secondary Server Status field.
• Set to True so the configured secondary RADIUS
server is available for connection.
• Set to False so the secondary RADIUS server is not
available for connection.
Use the Primary Server IP Address field. Enter the IP
address of the primary RADIUS server.
Use the Secondary Server IP Address field. Enter the
IP address of the secondary RADIUS server.
Use the Port field. Enter the TCP port used for RADIUS
communication. The default is 1812
Use the Shared Secret field. The encrypted password
for accessing the RADIUS server.
Use the Retype Shared Secret field. Verify the shared
secret password by typing in the character string exactly
as you did for the Shared Secret field.
Use the Retry Time (seconds) field. The amount of
time for the device to attempt a connection with the
RADIUS server after a previous communication attempt
failed.
Use the Maximum Retransmission field. The number
of times the device will attempt to connect to the
RADIUS server without successfully connecting.
• Use the Set Primary Server Status and/or the Set
Secondary Server Status field(s). Set to False so
the RADIUS server is not available for connection.
• Use the Primary Server IP Address and/or
Secondary Server IP Address field(s). Remove the
IP address.
Avaya W310 User's Guide