Avaya W310 User Manual page 166

Chapter 12 W310 WLAN Gateway Wireless Features
Use this command . . .
ip-protocol
<name> | <number>
source-user-
group <name>
destination-
user-group
<name>
140
To do the following . . .
Set the IP protocol for the specified rule.
Protocol No.
Ah 51
Esp 50
Icmp 1
Igmp 2
Ipcomp 108
Ipinip 4
Ospf 89
Pim 103
Rsvp 46
Tcp 6
Udp 17
Vrrp 112
Spectralink 119
Example:
ip-protocol tcp
Assigns a source or destination user group to the specified
rule. Source and destination user group name can use up to
32 characters.
Example:
source-user-group guests
Description
Authentication header protocol
Encapsulation security protocol
Internet Control Message Protocol
Internet Gateway Message Protocol
IP payload compression protocol
IP in IP tunneling
OSPF routing protocol
Protocol Independent Multicast
Resource reservation protocol
Transmission Control Protocol
User Datagram Protocol
Virtual routing redundancy protocol
SpectraLink wireless phones
Continued
Avaya W310 User's Guide