Avaya W310 User Manual page 273

For example, the following sequence of commands attach policy lists to the VLAN 2
interface. Access control list 301 becomes the Ingress Access Control List for VLAN 2. QoS
list 401 becomes the Egress QoS List for VLAN 2.
W310-1# interface Vlan 2
W310-1(if:Vlan 2)# ip access-group 301 in
Done!
W310-1(if:Vlan 2)# ip qos-group 401 out
Done!
• To remove a list from an interface, use the
example, if the Ingress Access Control List for the VLAN 1 interface is list number 302,
you can remove the list from the interface by typing the following commands:
W310-1(super)# interface Vlan 1
W310-1(super-if:Vlan 1)# no ip access-group in
Done!
Note: You cannot change or delete a default list. You cannot change or delete any list when
it is attached to an interface. In order to change or delete a list that is attached to an interface,
you must first remove the list from the interface. You can then change or delete the list. After
changing the list, you can reattach the list to the interface.
Avaya W310 User's Guide
form of the appropriate command. For
no
Configuring Policy
247