Configuring An Ssid Entry - Avaya W310 User Manual

Chapter 12 W310 WLAN Gateway Wireless Features
— WiFi Protected Access - Pre-Shared Key (WPA-PSK) - does not require a RADIUS
server. WPA-PSK is a simplified but still powerful form of WPA that sets a static
key or "pass phrase" as with WEP. But, using TKIP, WPA-PSK automatically
changes the keys at a preset time interval.

Configuring an SSID Entry

Assign an SSID to a specific W110 (LAP) using the ssid CLI command. Several
parameters must be configured to meet the specific operating environments. In the example
that follows:
• An SSID named "lobby" is created and assigned to physical port 1 on the W310.
• Once the SSID is assigned, operation in a low security environment does not require a
"closed system" or the suppression of the SSID in "broadcast" beacons. Using the
following CLI, the closed system is disabled and broadcast is enabled.
• Security mode level will use the default "none". For the security mode settings, see
Authentication and Encryption
table entry to verify security-mode none.
Example
W310-1(super)# ssid lobby
W310-1(super/SSID lobby)# vlan 1
W310-1(super/SSID lobby)# closed-system accept-any
W310-1(super/SSID lobby)# broadcast transmit
W310-1(super/SSID lobby)# exit
W310-1(super)#show ssid
-------------------------------------------------------------
SSID Name | BC | Cls | Scrty | Eff |Re-Key
-------------------------------------------------------------
default
lobby
148
Modes. Use the show command to view the SSID
| | |
on off none
on off none
| VLAN | Acc
| WEP |Interval|
2 3600 by UG
1 3600
Avaya W310 User's Guide
|VLAN
off
by UG off