Table of Contents
Advertisement
System Manager, Avaya Aura
• Description: Type a description for the element.
• Node: Type the FQDN address of the Avaya Aura
6. To enable SSO login, in the Access Profile section, perform the following:
a. Click New.
b. In the Application System Supported Protocol section, in the Protocol field, click URI.
c. In the Access Profile Details section, in the Name field, type a name for the access
profile.
d. In the Access Profile Type field, click EMURL.
e. In the Protocol field, click https.
f. In the Host field, type the Avaya Aura
g. In the Port field, type 8445.
h. In the Path field, type /admin.
i. In the Order field, retain the default value.
j. In the Description field, type a description of the access profile.
k. Click Save.
7. Click Commit.
8. On the System Manager console, click Elements > Web Gateway to verify that the Avaya
®
Aura
Web Gateway element has been added.
Configuring SIP Trunks for the Avaya Aura
System Manager
About this task
®
The Avaya Aura
Use this procedure to ensure that Session Manager is configured to accept these messages.
Important:
For an Avaya Aura
using the respective node IP or local FQDN when required.
Before you begin
Set up your Avaya Aura
Procedure
1. On the System Manager web console, click Elements > Routing > SIP Entities.
2. In the SIP Entities area, click New to create a new SIP entity for your server.
You can also edit an existing SIP entity using the Edit button.
October 2018
®
Device Services, Media Server, and Avaya Equinox Conferencing configurations
Web Gateway sends SIP messages to Session Manager port 5061 using TLS.
®
Web Gateway cluster, repeat this procedure for each node in the cluster
®
infrastructure, including System Manager.
Deploying the Avaya Aura
Comments on this document? infodev@avaya.com
®
Web Gateway server.
®
Web Gateway server FQDN.
®
Web Gateway on
®
Web Gateway
100
Advertisement
Table of Contents
