Avaya W310 User Manual page 178

Chapter 12 W310 WLAN Gateway Wireless Features
The following table provides a list of the fields in the SSID Table and their descriptions:
Figure 12.3 SSID Table Parameters
Field
Set a Service Set
Identifier (SSID)
Assign a VLAN
Assign a VLAN to all
SSIDs
Assign a security mode
152
Description
Click Insert and then enter the SSID name in the SSID
field.
Note: You cannot delete the default SSID, however, you can change the
parameters associated with it.
Click Insert and then enter the VLAN to which the SSID
belongs in the VLAN field.
Static VLAN that can receive traffic from all SSIDs in the
domain. This entry is in the Accessible VLANs field.
Click Insert and select the Security Mode from the drop-
down menu. This security method is applied to the SSID.
Values include:
• none (default)
• dot1x
• WEP
• WPA
• WPA-PSK
On bridged networks, you must configure
each VLAN in Layer 2 before you assign
VLANs to the wireless network. This is
done as follows:
- Use the set vlan CLI command, or
- Under the Device Manager tab, select
Configure on the menu bar and then
VLANs.
Avaya W310 User's Guide
Continued