Mac Access Control Via Radius Authentication; Radius Authentication With 802.1X; Radius Authentication Cli Commands - Avaya W310 User Manual

MAC Access Control Via RADIUS Authentication

If you want to control wireless access to the network and if your network includes a
RADIUS Server, you can store the list of MAC addresses on the RADIUS server rather than
configure each AP individually.

RADIUS Authentication with 802.1x

You must configure a primary EAP/802.1x Authentication server to use 802.1x security. A
back-up server is optional.

RADIUS Authentication CLI Commands

In order to...
Remove a primary or secondary
RADIUS server
Enable or disable RADIUS
authentication for the W310
Set the number of times an access
request is sent when there is no
response from the RADIUS server
Set the time to wait before sending
another access request to the RADIUS
server
Enable the authentication secret for the
W310
Set the IP address and shared secret for
the primary and/or secondary RADIUS
server
Set the RADIUS shared secret
Display all RADIUS authentication
configurations
Avaya W310 User's Guide
Chapter 12 W310 WLAN Gateway Wireless Features
Use the following command...
clear radius authentication server
set radius authentication
set radius authentication retry-number
set radius authentication retry-time
set radius authentication secret
set radius authentication server
set radius secret
show radius authentication
199