Radio Card Cli Commands - Avaya W310 User Manual

Chapter 12 W310 WLAN Gateway Wireless Features

Radio Card CLI Commands

In order to...
Set the power management mode
Set the number of beacon intervals that
will elapse between transmission of
beacon frames containing a Traffic
Indicator Message element
Set the number of time units that an AP
will use for scheduling beacon
transmissions
Set the packet size of a Request To
Send (RTS) transmission
Set the maximum number of
transmission attempts that will be made
by a frame (that is less than or equal to
the RTS threshold) before a failure is
indicated
Set the maximum number of
transmission attempts that will be made
by a frame (that is greater than or equal
to the RTS threshold) before a failure is
indicated
Set the size of the fragmentation
threshold
Set the currently supported regulatory
domain
Set the transmission power level
Set the effective transmission power
level
Set the current frequency channel for
an 802.11g radio card
Set the frequency channel for an
802.11a or 802.11g radio card
214
Use the following command...
power-management-mode
dtim-period
beacon-period
rts-threshold
short-retry-limit
long-retry-limit
fragmentation-threshold
current-regulatory-domain
tx-power-level
tx-power-level-effective
current-frequency-channel
channel-frequency
Avaya W310 User's Guide