Avaya W310 User Manual page 148

Chapter 12 W310 WLAN Gateway Wireless Features
Use this field . . .
Regulatory Domain
Multicast Tx Rate
Unicast Tx Rate
Beacon Period
DTIM (Delivery Traffic
Indication Map) Period
Automatic Channel
Selection
Channel Frequency
122
To do the following . . .
View the regulatory authority supported by the wireless
interface. This field is read-only.
Use the drop-down menu to select the rate at which the
transceiver transmits multicast and broadcast traffic.
Values range from the default of Auto Fallback (0) to 54
Mbps.
Use the drop-down menu to select the rate at which the
transceiver transmits unicast traffic. Values range from the
default of Auto Fallback (0) to 54 Mbps.
Click on text box to enter the amount of time between
beacon transmissions. The range is 1 to 65535
milliseconds. The default value is 100.
Click on the text box to enter the number of beacon periods
between transmission of DTIM Count frames with a value
of zero. The range is 1 to 255. The default value is 1.
Use the drop-down menu to enable or disable (default).
When enabled, the W110 (LAP) selects its channel
frequency automatically. Automatic Channel Selection
automatically enables when Regulatory Domain is ETSI.
If you disable Automatic Channel Selection
through the W310 Device Manager or the
CLI (channel-selection
selective), then you must set the
Channel Frequency for the W110.
Use the drop-down menu to select the current operating
frequency of the W110 (LAP). This field is only active
when Automatic Channel Selection is disabled.
Avaya W310 User's Guide