Concluding Steps - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

14.3.3.5 Concluding steps

Perform the following procedures to complete the task:
Ê Reinstall the fan module as described in section
module" on page
Ê Close the server cover as described in section
page 70.
Ê Reconnect the AC power cord to the power supply unit.
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
TX120 S3
158.
103.
Upgrade and Maintenance Manual
System board and components
"Installing the system fan
"Closing the server" on
"Enabling
345