Installing A Replacement Fbu - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Figure 106: Removing the FBU from the FBU holder
Ê At a slight angle, slide the FBU from under the retaining brackets of the FBU
holder and remove it.
9.3.6.5

Installing a replacement FBU

Ê Install the new FBU into the FBU holder as described in section
the FBU" on page
Ê Install the FBU holder into the chassis as described in section
FBU holder into the chassis" on page
Ê Connect the FBU adapter cable to the TFM as described in section
"Connecting the FBU adapter cable to the TFM" on page
TX120 S3
199.
Upgrade and Maintenance Manual
Expansion cards and backup units
200.
"Preparing
"Installing the
200.
213