Expansion cards and backup units
9.3
Backup Units
The Backup Unit backs up the memory contents of the connected SAS RAID
controller in the event of a power failure.
The server offers different backup units depending on the used RAID controller:
– BBU (Battery Backup Unit)
– FBU (Flash Backup Unit)
9.3.1
Installing a BBU
Upgrade and Repair Units (URU)
Average task duration: 5 minutes
V
CAUTION!
For further safety information, please refer to
page
37.
9.3.1.1
Required tools
Preliminary and concluding steps: tool-less
●
Installing a BBU: tool-less
●
9.3.1.2
Preliminary steps
Before installing a BBU, perform the following steps:
Ê Disable boot watchdog functionality as described in section
SVOM boot watchdog functionality" on page
Ê Shut down the defective server as described in section
server" on page
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page
61.
188
58.
Upgrade and Maintenance Manual
"Important information" on
"Disabling
80.
"Shutting down the
"Opening the server" on
TX120 S3