System fan and HDD fan
8.2.2.6
Installing the HDD fan module
Figure 77: Inserting the HDD fan module holder
Ê Insert the hooks of the HDD fan module holder (see blue circles).
Ê Fold the fan module holder back to the front cage and press it down so that
the retaining bracket engages.
8.2.2.7
Concluding steps
Ê Close the front cage as described in section
page
68.
Ê Close the server cover as described in section
page
70.
Ê Reinstall all HDD / SSD modules to their original drive bays as described in
section
"Installing 2.5-inch HDD / SSD modules" on page
Ê Reconnect the AC power cord to the power supply unit.
"Performing a fan test after replacing a defective fan" on page 108
Ê
172
Upgrade and Maintenance Manual
"Closing the front cage" on
"Closing the server" on
121.
TX120 S3