Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual page 144

Hard disk drives / solid state drives
V
CAUTION!
Ensure that all hard disk drives are uniquely identified so that you can
reinsert them into their original bays after replacing the HDD
backplane.
Ê Remove the server cover as described in section
page 61.
Figure 50: Disconnecting the SATA cables from the system board
Ê Disconnect the SATA cable from the system board.
Ê Open the front cage as described in section
page 66.
Ê Remove the HDD fan as described in section
module" on page
144
168.
Upgrade and Maintenance Manual
"Opening the server" on
"Opening the front cage" on
"Removing the HDD fan
TX120 S3