Concluding Steps - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Expansion cards and backup units
9.3.6.6

Concluding steps

Perform the following procedures to complete the task:
Ê Close the front cage as described in section
page 68.
Ê Close the server cover as described in section
page 70.
Ê Reconnect the AC power cord to the power supply unit.
Ê If applicable, update the firmware of the RAID controller that has been
connected to the FBU as described in section
firmware" on page
Ê Enable boot watchdog functionality as described in section
boot watchdog functionality" on page
214
91.
Upgrade and Maintenance Manual
"Closing the front cage" on
"Closing the server" on
"Updating RAID controller
96.
"Enabling SVOM
TX120 S3