Concluding Steps - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

System board and components

14.3.1.4 Concluding steps

Perform the following procedures to complete the task:
Ê Close the server cover as described in section
page 70.
Ê Reconnect the AC power cord to the power supply unit.
Ê Enable TPM in the system board BIOS. Proceed as follows:
Ê Switch on or restart your server.
Ê As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
Ê Select the Advanced menu.
Ê Select the Trusted Computing submenu.
Ê Set the TPM Support and TPM State settings to Enabled.
Ê Under Pending TPM operation, select the desired TPM operation mode.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the "D3049 BIOS Setup Utility for PRIMERGY
TX140 S1 / TX120 S3 Reference Manual" available online at
http://manuals.ts.fujitsu.com
http://jp.fujitsu.com/platform/server/primergy/manual/
market) or from the ServerView Suite DVD 2 supplied with your
PRIMERGY server.
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
338
(EMEA market) or
103.
Upgrade and Maintenance Manual
"Closing the server" on
(Japanese
"Enabling
TX120 S3