Removing Expansion Cards; Required Tools; Preliminary Steps - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Expansion cards and backup units
9.2.2

Removing expansion cards

Upgrade and Repair Units (URU)
Average task duration: 5 minutes
9.2.2.1

Required tools

Preliminary and concluding steps: tool-less
●
Removing expansion cards: tool-less
●
9.2.2.2

Preliminary steps

Before removing an expansion card, perform the following steps:
Ê Locate the defective server as described in section
server" on page
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Disable boot watchdog functionality as described in section
SVOM boot watchdog functionality" on page
Ê Shut down the server as described in section
page 58.
Ê Disconnect the AC power cord from the system.
Ê If applicable, disconnect external cables to the expansion card.
Ê Remove the server cover as described in section
page 61.
180
50.
79.
Upgrade and Maintenance Manual
"Locating the defective
"Disabling BitLocker
"Disabling
80.
"Shutting down the server" on
"Opening the server" on
TX120 S3