Basic hardware procedures
4.2
Shutting down the server
V
CAUTION!
For further safety information, please refer to chapter
information" on page
I
This step is only required when upgrading or replacing non-hot plug
components.
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Inform the system administrator that the server will be shut down and put
offline.
Ê Terminate all applications.
Figure 8: Power button on the front panel
Ê Shut down the server.
I
If the system is running an ACPI-compliant operating system, the
pressing the On / Off button will performs a graceful shutdown.
Ê Switch on the ID indicator on the front and rear connector panels of the
server as described in section
58
37.
79.
"Locating the defective server" on page
Upgrade and Maintenance Manual
"Important
"Disabling BitLocker
50.
TX120 S3