12.3.3 Replacing a backup drive
Field Replaceable Units (FRU)
Average task duration: 10 minutes
12.3.3.1 Required tools
Preliminary and concluding steps: toolless
●
Removing accessible drives:
●
– Phillips PH2 / (+) No. 2 screw driver
12.3.3.2 Preliminary steps
Before installing an accessible drive, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Remove any backup medium from the drive.
Ê Shut down the server as described in section
page
58.
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page
61.
12.3.3.3 Replacing a backup drive
Ê Remove the defective backup drive as described in section
backup drive" on page
Ê Install the new backup drive as described in section
on page
280.
TX120 S3
79.
286.
Upgrade and Maintenance Manual
Accessible drives
"Disabling BitLocker
"Shutting down the server" on
"Opening the server" on
"Removing
"Installing backup drive"
291