Backup Drive; Installing Backup Drive; Required Tools; Preliminary Steps - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Accessible drives
12.3

Backup drive

12.3.1 Installing backup drive

Upgrade and Repair Units (URU)
Average task duration: 10 minutes

12.3.1.1 Required tools

Preliminary and concluding steps: toolless
●
Removing accessible drives:
●
– Phillips PH2 / (+) No. 2 screw driver

12.3.1.2 Preliminary steps

Before installing an accessible drive, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Shut down the server as described in section
page 58.
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page 61.
280
79.
Upgrade and Maintenance Manual
"Disabling BitLocker
"Shutting down the server" on
"Opening the server" on
TX120 S3