Appendix
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section
page
73.
Ê Connect a keyboard, mouse and display to the server.
Ê Switch on the server as described in section
page
77.
V
CAUTION!
Since the fan module is not included in the minimum startup
configuration, the server must be shut down immediately after the
diagnostic process is complete (POST phase has been passed).
The minimum startup configuration must be used exclusively for
diagnostic purposes by maintenance personnel, never in daily
operation!
440
"Connecting the server to the mains" on
Upgrade and Maintenance Manual
"Switching on the server" on
TX120 S3