Front panel and LAN connector
13.2
Front LAN connector
13.2.1 Installing the front LAN connector
Field Replaceable Units (FRU)
Average task duration: 10 minutes
13.2.1.1 Required tools
Preliminary and concluding steps: tool-less
●
Replacing the front LAN connector:
●
– Phillips PH2 / (+) No. 2 screw driver
13.2.1.2 Preliminary steps
Before replacing the front LAN connector, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Locate the defective server as described in section
server" on page
Ê Shut down the server as described in section
page
58.
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page
61.
300
79.
50.
Upgrade and Maintenance Manual
"Disabling BitLocker
"Locating the defective
"Shutting down the server" on
"Opening the server" on
TX120 S3