Documents You Need At Hand - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Before you start
Screw driver /
Bit insert
Phillips
PH1 / (+) No. 1
Phillips
PH2 / (+) No. 2
Table 3: List of required tools and used screws
2.4

Documents you need at hand

Maintenance procedures may include references to additional documentation.
When preparing the maintenance task, ensure that all required manuals are
available according to the overview below.
I
– Ensure to store all printed manuals enclosed with your server in a
save place for future reference.
– Unless stated otherwise, all manuals are available online at
http://manuals.ts.fujitsu.com
ServerView Suite DVD 2 supplied with your PRIMERGY server.
For the Japanese market please use the following address:
http://jp.fujitsu.com/platform/server/primergy/manual/
Document
"Quick Start Hardware -
PRIMERGY Server TX120 S3"
leaflet
" はじめにお読みください -
PRIMERGY TX120 S3 " リーフ
レット for the Japanese market
Table 4: Documentation you need at hand
34
Screw
under Industry standard servers or from the
Description
Quick installation poster for initial operation,
available only in printed form
Upgrade and Maintenance Manual
Usage Type
TFM module M2.5 x 4 mm
(silver)
C26192-Y10-
C103
M3 x 5 mm
USB 3.0 (silver)
interface (contained in card
card D3305 kit S26361-D3305-
A10)
TX120 S3