Figure 157: Inserting the ODD filler cover.
Ê Insert the ODD filler cover into the resess on the right side (1).
Ê Fold the ODD filler cover back (2).
12.2.2.4 Concluding steps
Perform the following procedures to complete the task:
Ê Close the front cage as described in
Ê Close the server cover as described in section
page
70.
Ê Reconnect the AC power cord to the power supply unit.
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
TX120 S3
103.
Upgrade and Maintenance Manual
"Closing the front cage" on page
"Closing the server" on
Accessible drives
68.
"Enabling
277