Expansion cards and backup units
9.3.4.3
Disconnecting the FBU adapter cable from the TFM
Figure 101: Disconnecting the FBU adapter cable from the TFM
Ê Disconnect the FBU adapter cable from the TFM.
Ê Remove the FBU adapter cable from the cable clamp (see figure
page
203).
9.3.4.4
Removing the FBU holder from the chassis
Ê Remove the FBU holder from the chassis as described in section
the BBU holder from the chassis" on page
9.3.4.5
Concluding steps
Perform the following procedures to complete the task:
Ê Close the front cage as described in section
page
68.
Ê Close the server cover as described in section
page
70.
Ê Reconnect the AC power cord to the power supply unit.
206
Upgrade and Maintenance Manual
204.
"Closing the front cage" on
"Closing the server" on
99 on
"Removing
TX120 S3