Removing The Bbu From The Chassis; Removing The Bbu From The Bbu Holder - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Expansion cards and backup units
9.3.5.3

Removing the BBU from the chassis

Ê Remove the BBU from the chassis as described in section
BBU" on page
9.3.5.4

Removing the BBU from the BBU holder

Figure 102: Removing the BBU from the BBU holder
Ê Press out on the right retaining bracket on the BBU holder (1) to disengange
the locking mechanism while pulling up on the BBU (2).
208
202.
Upgrade and Maintenance Manual
"Removing a
TX120 S3