Replacing The Hdd Fan Module; Replacing The Hdd Fan Module For 3.5-Inch Version; Required Tools; Preliminary Steps - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

8.2

Replacing the HDD fan module

Upgrade and Repair Units (URU)
Average task duration: 5 minutes
8.2.1

Replacing the HDD fan module for 3.5-inch version

8.2.1.1

Required tools

Preliminary and concluding steps: tool-less
●
Replacing the fan module: tool-less
●
8.2.1.2

Preliminary steps

Before replacing the HDD fan module, perform the following steps:
Ê Locate the defective server as described in section
server" on page
Ê Shut down the defective server as described in section
server" on page
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page 61.
Ê Open the front cage as described in section
page 66.
TX120 S3
50.
58.
Upgrade and Maintenance Manual
System fan and HDD fan
"Locating the defective
"Shutting down the
"Opening the server" on
"Opening the front cage" on
161