Resetting The Boot Retry Counter; Viewing The Boot Retry Counter - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Basic software procedures
5.2.6

Resetting the boot retry counter

The boot retry counter is decremented from its preset value every time the
POST watchdog initiates a system reboot. When the value has reached '0', the
system will shut down and power off.
5.2.6.1

Viewing the boot retry counter

The current boot retry counter status is available in the BIOS:
Ê Enter the BIOS.
Ê Select the Server Mgmt menu.
Ê Under Boot Retry Counter the current number of remaining boot attempts is
displayed. The value is further decremented with every failed boot attempt
or system reboot resulting from critical system errors.
Ê Exit the BIOS.
5.2.6.2

Resetting the boot retry counter

The boot retry counter should be reset to its original value concluding every
service task.
I
Please note, if the customer does not know about the original boot
retry values:
If the system boots up and no further errors occur within 6 hours after that
successful boot attempt, the boot retry counter will automatically be reset
to its default value. Please take into account, that the specified number
of boot attempts can only be determined after this period of time.
If the customer knows about the original boot retry values, proceed as follows
to reset or configure the boot retry counter:
Resetting the boot retry counter in the BIOS
Ê Enter the BIOS.
Ê Select the Server Mgmt menu.
Ê Under Boot Retry Counter press the [+] or [-]keys to specify the maximum
number of boot attempts (0 to 7).
Ê Exit the BIOS.
94 Upgrade and Maintenance Manual
TX120 S3