Figure 84: Removing the TFM
Ê Remove the three screws (1).
Ê Remove the TFM (2).
9.2.4.4
Installing the new TFM
Ê Install the new TFM as described in section
controller (if applicable)" on page
Ê Connect the FBU adapater cable to the TFM as described in section
"Connecting the FBU adapter cable to the TFM" on page
Ê Install the expansion card as described in section
cards" on page
9.2.4.5
Concluding steps
Perform the following procedures to complete the task:
Ê Close the server cover as described in section
page
70.
Ê If applicable, connect external cables to the expansion card.
Ê Reconnect the AC power cord to the power supply unit.
TX120 S3
176.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing TFM to the RAID
198.
"Installing expansion
"Closing the server" on
200.
187