Basic hardware procedures
4.6
Closing the server
V
CAUTION!
Before attaching the covers, make sure no unnecessary parts or tools
●
are left inside the server.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY TX120 S3 server must not run while the side cover is
removed.
For further safety information, please refer to chapter
●
information" on page
4.6.1
Mounting the hard disk drive cover
Figure 20: Installing the hard disk drive cover
Ê Insert the hard disk drive cover with the lower side into the side / top
cover (1).
Ê Close the hard disk drive cover (2).
70
37.
Upgrade and Maintenance Manual
"Important
TX120 S3