Removing An Fbu; Required Tools; Preliminary Steps - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

9.3.4

Removing an FBU

Upgrade and Repair Units (URU)
Average task duration: 5 minutes
V
CAUTION!
Do not throw FBUs into the trash can. Batteries must be disposed of in
accordance with local regulations concerning special waste.
For further safety information, please refer to section "Environmental
protection" in the PRIMERGY TX120 S3 Server Operating Manual.
9.3.4.1

Required tools

Preliminary and concluding steps: tool-less
●
Removing an FBU: tool-less
●
9.3.4.2

Preliminary steps

Before removing an FBU, perform the following steps:
Ê Locate the defective server as described in section
server" on page
Ê Shut down the defective server as described in section
server" on page
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page 61.
Ê Open the front cage as described in section
page 66.
TX120 S3
50.
58.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Locating the defective
"Opening the server" on
"Opening the front cage" on
"Shutting down the
205