Concluding Steps - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

System fan and HDD fan
Figure 66: Connecting the system fan cable
Ê Connect the fan cable to system board connector FAN1 SYS.
8.1.7

Concluding steps

Ê Close the server cover as described in section
page 70.
Ê Reconnect the AC power cord to the power supply unit.
"Performing a fan test after replacing a defective fan" on page 108
Ê
160 Upgrade and Maintenance Manual
"Closing the server" on
TX120 S3