Removing The Tpm; Re-Installing The Tpm - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

System board and components
Ê Shut down the server as described in section
page 58.
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page 61.

14.3.3.3 Removing the TPM

Ê Remove the TPM board as described in section
on page 339.
Ê Leave the TPM spacer on the system board when removing the defective
TPM board.

14.3.3.4 Re-installing the TPM

Figure 209: TPM spacer
Ê The TPM spacer is already present on the system board.
Ê Re-install the TPM board as described in section
on page 333.
344 Upgrade and Maintenance Manual
"Shutting down the server" on
"Opening the server" on
"Removing the TPM board"
"Installing the TPM board"
TX120 S3