Expansion Cards; Installing Expansion Cards; Required Tools; Preliminary Steps - Fujitsu PRIMERGY TX120 S3 Upgrade And Maintenance Manual

Expansion cards and backup units
for the Japanese market:
http://jp.fujitsu.com/platform/server/primergy/system/
9.2

Expansion cards

9.2.1

Installing expansion cards

Upgrade and Repair Units (URU)
Average hardware task duration: 5 minutes
Average software task duration: 5 minutes
9.2.1.1

Required tools

Preliminary and concluding steps: tool-less
●
Installing expansion cards: tool-less
●
9.2.1.2

Preliminary steps

Before installing an expansion card, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Disable boot watchdog functionality as described in section
SVOM boot watchdog functionality" on page
Ê If applicable, verify existing LAN teaming configurations as described in
section "Configuring LAN teaming" on page
Ê Shut down the server as described in section
page 58.
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page 61.
176
79.
Upgrade and Maintenance Manual
"Disabling BitLocker
"Disabling
80.
83.
"Shutting down the server" on
"Opening the server" on
TX120 S3